With 100% groundwater as the County's drinking water source, mineral build-up in the water distribution system is common. Watermain maintenance helps ensure your service continues running smoothly.

Watermain flushing

Regular watermain flushing helps maintain drinking water quality by removing build-up and mineral deposits in the distribution system. Oxford County Water Operations performs watermain flushing twice a year by forcing water through watermains at high speed and discharging it through hydrants and blow-offs. The fast-moving water washes away any sediment. Flushing takes place between 8:00 a.m. - 5:00 p.m. on the dates specified below, with the exception of Tavistock, Drumbo and Ingersoll.

2023 FALL FLUSHING SCHEDULE
COMMUNITYFLUSHING DATESTIME
Tavistock

September 24

September 25-29

7:00 a.m. - 12:00 p.m.

8:00 a.m. - 5:00 p.m.

Lakeside September 25 8:00 a.m. - 5:00 p.m.
Embro September 26 8:00 a.m. - 5:00 p.m.
Beachville September 27 8:00 a.m. - 5:00 p.m.
Bright September 28 8:00 a.m. - 5:00 p.m.
Hickson

September 29

8:00 a.m. – 5:00 p.m.

Dereham Centre

September 29

8:00 a.m. - 5:00 p.m.
Plattsville October 3 – October 6 8:00 a.m. - 5:00 p.m.
Thamesford October 3 – October 6 8:00 a.m. - 5:00 p.m.
Innerkip October 10 – October 13 8:00 a.m. - 5:00 p.m.
Otterville and Springford October 10 – October 13 8:00 a.m. - 5:00 p.m.
Ingersoll (South of King St.) October 16 – October 20 8:00 a.m. – 11:00 p.m.
Ingersoll (North of King St.)

October 23 – October 27

8:00 a.m. – 11:00 p.m.

Drumbo

October 30 – November 2 10:00 p.m. – 6:00 a.m.
Princeton November 6 – November 8 8:00 a.m. - 5:00 p.m.
Brownsville November 6 8:00 a.m. - 5:00 p.m.
Mount Elgin November 9 8:00 a.m. - 5:00 p.m.
Sweaburg November 10 8:00 a.m. - 5:00 p.m.
Norwich November 30 – December 6 8:00 a.m. - 5:00 p.m.

 Download the resident handout

 

 WHAT YOU NEED TO KNOW
Flushing can cause discoloured water.

Discoloured water following watermain flushing is not uncommon and is only temporary. This is an aesthetic characteristic of the water, and not a health concern.

We recommend waiting until your water runs clear before using it.

Please contact Oxford County if:

  • Your water clarity has not returned to normal two hours after flushing.
  • You have low water pressure or no water after watermain flushing.
 STEPS TO PREPARE 
 

Before

  • Set aside tap water for drinking, cooking, and other household uses
  • Complete tasks that use tap water in advance (i.e., cleaning, showering, laundry)

During

  • Avoid using water to prevent drawing discoloured water into your pipes

After

  • If you experience discoloured water, run cold water for 10 minutes until the water runs clear. This could be done from an outside tap or laundry faucet if not connected to a water softener or filter

*TIP You can use your garden hose to water your lawn or garden while completing this step!

  • Resume normal use


Watermain Cleaning

Occasionally, watermains may require cleaning to maintain the water quality and supply you expect.

UPCOMING WATERMAIN CLEANING

COMMUNITYFLUSHING DATESTIME
Drumbo - Download notice October 30 – November 2 10:00 p.m. – 6:00 a.m.
 WHAT YOU NEED TO KNOW
 

Additional cleaning with foam swabs will occur. It is important that you DO NOT turn on your water while swabbing is taking place to avoid drawing discoloured water or foam swab pieces into your home’s internal plumbing. It is the consumer’s responsibility to take the below preventative measures.

Cleaning can cause discoloured water.
We recommend waiting until your water runs clear before using it.

Please contact Oxford County if:
• Your water clarity has not returned to normal two hours after watermain cleaning
• You have low water pressure or no water after watermain cleaning.

 STEPS TO PREPARE
 

BEFORE

  • Set aside tap water for drinking, cooking, and other household uses
  • Complete tasks that use tap water in advance (i.e., cleaning, showering, laundry)
  • Turn off your incoming water supply as well as your water softener and the electrical supply to your hot water tank

DURING

  • Do not use water to prevent drawing discoloured water and foam swab pieces into your pipes.

AFTER

  • Turn on a cold water tap not connected to a water softener or filter and let it run for approximately three (3) to five (5) minutes or until the water runs clear  TIP - Use your (unsoftened) garden hose to water your lawn while doing this step!
  • Flush other taps/toilets as needed to remove the discoloured water from your pipes
  • When the water is clear, turn on your water softener and the electrical supply to your hot water tank
  • Resume everyday use, including drinking the water and washing clothes